Insulation technologies English
 
 

Quality

The works pays a great attention to quality of products. Each party is required to own quality control laboratories equipped with modern high-precision equipment. The laboratory of non-destructive methods of control deals with ultrasonic inspection and thickness measurement of the weld metal. The chemical laboratory is engaged in sampling and quality control of polyurethane and polyethylene.

Tests are conducted regularly by an independent test center "PKTI-StroyTest", and all measuring instruments and test equipment of the factory go regularly through metrological verification and calibration. According to the results of certification and periodic testing of the North-West of the Certification Body of production in construction, the company is characterized by stability and quality production.

2004, autumn.
The sanitary-epidemiological conclusion on the compliance of pipes and fittings with thermal insulation from polyurethane foam in polyethylene covering was received.

State Standard 30732-2001.

 

 

2005, spring.
The certificate of conformity of pipes and fittings with thermal insulation from polyurethane foam in polyethylene covering of State Standard 30732-2001 was received.

 

2005, summer
The voluntary certificate of conformity on pipes and fittings of State Standard 30732-2001 in heating "Heat certification" was gained.

 

The staff of our works has been trained installation, operation and maintenance of the discharge line of pipes made ​​of polyethylene and pre-insulated pipes in Finland and has the appropriate certificates.

 

2005, autumn
The certificate of test laboratory, confirming its technical competence in the FSI "Test-St.-Petersburg" was received.

 

2006, Spring
The voluntary certificate of conformity on pipes and fittings of State Standard 30732-2001 was obtained  in the Moscow system of voluntary certification in the construction of "Mosstroysertification."

 

2006, spring
The certificate of productive appraisal of welding technology in accordance with the requirements of RD 03-615-03 in the National Association of Welding and Control was received.

 

2006, summer
The certificate of manufacturing approval of production technology of split sleeves welded polyethylene pipes for sealing joints in the insulation of polyurethane foam and collar from polyethylene was received.

(Sleeves RPP- 0, RPP-1, LPP-2)

Issued by the Central Scientific Institute of Corrosion and Certification.

 

2006, winter
The certificate of manufacturing approval of production technology of the split sleeves welded polyethylene pipes for sealing joints in the insulation of polyurethane foam and collar from polyethylene was received.


(TU 5772-009-70629337-2006)
Issued Sevzapstroysertification OS.

 

2008, Autumn
The certificate of conformity with technical regulations was received.

Issued by State Standard.

 

2009, Summer
The technical evidence about the suitability of plastic sleeves split electrically produced by "Insulation Technology" for the use in construction in the territory of the Republic of Belarus.

Issued by RUE "Stroytehnorm" was received.

   
   2009, Autumn
The certificate of productive appraisal of welding technology in accordance with the requirements of RD 03-615-03 in the National Association of Welding and Control was receivedThe certificate of manufacturing approval of production technology of the split sleeves welded polyethylene pipes for sealing joints in the insulation of polyurethane foam and collar from polyethylene was received.


 
   
   

2010, spring
The certificate of productive appraisal of welding technology in the National Association of Welding and Control was received.

 

2010, Autumn
The certificate of conformity of quality management system for the design, development, manufacture and production of steel pipes and fittings, insulated with polyurethane foam, coated with hydro-protective polyethylene or galvanized steel and polyethylene sleeves for insulation joints of pipelines with State Standards R ISO 9001-2008 (ISO 9001:2008).
Issued by the certification of quality systems company "TRUST-St.-Petersburg" Ltd.

   
   

2011, winter.
The certificate of conformity of pipes and fittings with thermal insulation from polyurethane foam in polyethylene covering of State Standard 30732-2001 was received.

   
  2012, winter
The certificate of manufacturing approval of production technology of the split sleeves welded polyethylene pipes for sealing joints in the insulation of polyurethane foam and collar from polyethylene was received.


   
   2013, winter
The certificate of productive appraisal of welding technology in accordance with the requirements of RD 03-615-03 in the National Association of Welding and Control was receivedThe certificate of manufacturing approval of production technology of the split sleeves welded polyethylene pipes for sealing joints in the insulation of polyurethane foam and collar from polyethylene was received.


   
2014, winter.
The certificate of conformity of pipes and fittings with thermal insulation from polyurethane foam in polyethylene covering of State Standard 30732-2006 was received. 

 

   

   

 
 

LLC Insulation technologies   www.izoltech.ru

Main office::
198152, St. Petersburg, Krasnoputilovskaya str. 48. (812) 334-01-05

Moscow representation office:
121354, Moscow, ul. Dorogobuzhskaya 14, bld. 1.

Copyright 2010 St. Petersburg

Site development by TROMEX studio